your local representative to help with any problem
OF YOUR EQUIPMENT BOARD
Board frames are normally made from anodysed aluminium extrusions
Clean with Handy Andy. When dry, polish using a clean dry duster.
| OVERHEAD PROJECTION
If permanent markers have been used in error on Overhead Projection Screens try to clean with Levers Handy Andy or Reckitts Window Cleaner. The marks can never be removed completely; the best that can be hoped for is to be left with a shadow.
Never use abrasive cleaners.
Brush down using a clean, stiff hand brush.
Never use permanent markers on Whiteboards
On a day to day basis clean using an Edding BMA2 Whiteboard Eraser.
Note you will require with this a box of Edding BMA4 refill tissues.
In the training situation, it is best to clean on a daily basis using Edding BMA1Cleaner Spray.
On a weekly basis, use Handy Andy. When dry, polish using a clean dry duster.
PROBLEM MARKINGS ON NON-MAGNETIC BOARDS
If permanent markers have been used in error clean with Levers Handy Andy or Reckitts Window Cleaner.
Do not rub too hard, as this will take off the gloss finish, essential for a properly working white board.
You will never get it all off; the best that can be hoped for is to be left with a shadow.
PROBLEM MARKINGS ON MAGNETIC BOARDS
Please contact us direct.
Never use abrasive cleaners on Whiteboards
If any more serious problem arises please contact Scarab direct.
|Send mail to Scarab Africa with questions or comments about this web site. Trade Enquiries Welcomed|
|Copyright © 2001 Scarab Africa.|